I'm not completely clear what you have. I'm guessing you are not
talking about a stock MC, but a setup with a bias adjustment. If that
is the case, then the 3/4 should go to the front.
Gerard
At 6:36 PM +0000 12/19/03, mg72racer@juno.com wrote:
>Installing a dual cylinder brake box in the Midget. Wheel cylinders
>and calipers are standard MK IV Sprite. One master has a 5/8" bore
>the other is 3/4". Which one should be connected to the front brakes?
>
>Thanks, and Merry Christmas....
>
>Mal Fay
>#72 MG Midget
--
Gerard Chateauvieux
Royal Motor Sales
Audi - VW - Mazda - Volvo
Direct line 415-241-1711
Check out my new and used inventory at:
http://www.royalmotorsales.com/en_US/
/// unsubscribe/change address requests to majordomo@autox.team.net or try
/// http://www.team.net/mailman/listinfo
/// Archives at http://www.team.net/archive/team-thicko
|