Randy,
Although specifications are hard to find in Sunbeam manuals, wheel
bearings and seals are metric standards. Any good bearing house has the
seals, races, bearings, and cages (if necessary) for R&R your wheel
bearings.
These would be "readily available"
I can't find the original call-outs in any Sunbeam literature, but if
you have yours to bring in, the ID is marked on all parts of the
bearing. Get your ID number from the part(s).
If you're a DIY lot's of Tiger bearings sold by: RockAuto.com -
service@rockauto.com
SKF (dimensions and alternate OEM part numbers:
Web Site: http://www.rockauto.com/catalog/moreinfo.php?pk=1840500
email: service@rockauto.com
1-866-ROCKAUTO (762-5288) (608) 661-1376
They list:
_Beck/Arnley_
_National _ Taper Bearing Cup Outer Diameter=2.717", Length=0.625",
Radius=0.046"
These are in the $5.70 to $6.35 each bracket.
Other major parts suppliers also carry various brands/prices.
A bearing Supply Store is sure to have them in major brands (Timken, etc.)
_Timken_ has a pretty nice web site:
<cid:part1.08010007.01040508@socal.rr.com>http://www.timken.com/en-us/products/bearings/productlist/roller/Tapered/SingleRow/Pages/default.aspx
Good Luck,
Steve
Steve Laifman
Editor
http://TigersUnited.com
rab65tiger@aol.com wrote:
> Is there a readily available Part numbers for front wheel bearings and seals,
> that I could get at a bearing house, or good auto parts store. I could go to
> S.S. or Classic, I am trying to go pick up locally right away?
>
> Randy B
_______________________________________________
Tigers@autox.team.net
Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
|