When I built my 302 (bored, stroked, blueprinted, etc) I added TrickFlow
(aluminum heads) and an aluminum radiator. They make all the difference. My
Tiger runs at 180 now - even when it's in the mid 90s outside.
Tym McDowell
> On September 29, 2018 at 1:42 PM "Russ and Tammy C. via Tigers"
> <tigers@autox.team.net> wrote:
>
>
>
> I have a 302 bored to 330 and it doesn't like slow running in the heat. I am
> removing the engine this winter and could make some changes if warrented.
> Will clean up the engine compartment, throw out bearing, clutch etc.
>
> Do aluminum heads run cooler than cast iron?
>
> Would I be well off to rebuild my very old radiator (stock) with copper or
> aluminum?
>
> . Russ - rtscolgan@yahoo.com Thanks again.
> _______________________________________________
>
> tigers@autox.team.net
>
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/pipermail/tigers
>
> Unsubscribe: http://autox.team.net/mailman/options/tigers/tym2@comcast.net
>
>
_______________________________________________
tigers@autox.team.net
Archive: http://www.team.net/pipermail/tigers
Unsubscribe: http://autox.team.net/mailman/options/tigers/mharc@autox.team.net
|