Automatic Chokes... Thanks

[dmbrock@julian.uwo.ca (David Brock)]

Well, I did it.

I knew that the cable was new and WD-40'd enough, and just figured that it
was the bend in the cable when it was attached, but I found that the crimp
at the carb end was too tight, and crimping the inner cable too.  No choke
conversions for me.

Thanks Again All.

David

--
dmbrock@julian.uwo.ca  <David M Brock>
The University of Western Ontario

I'm not going to bother with a .sig file for now.