Isky Z19 Cam

[Kenneth Brown <kbrown@trmx3.dot.ca.gov>]

Don't know if paul has posted this yet but here is the specs for the Isky Z19
cam :
Send in your cam for regrinding , 10 day turnaround, $90
.400" lift,  268 deg. duration, 2500-6500 rpm powerband.

Not sure if they consider it a fast road/rally/race cam or what. Doesn't look
to radical considering the duration is about 10 to 20 deg less than those made
by  Kent or Richard Good. Should give good power in the lower RPM range.

Ken Brown 
TR250 in pieces