Re: Tearing down the TR6

To:	triumphs@Autox.Team.Net (triumph)
Subject:	Re: Tearing down the TR6
From:	hapkejs@cig.mot.com (Jeff Hapke)
Date:	Wed, 19 Feb 1997 16:42:40 -0700

I am in the process of refinishing my dash. I couldn't save the old veneer, so I
picked up a new piece of walnut veneer. I think 48"x12" ..anyway it was big
enough to cover the whole dash in one piece. Cost: $4.00, at the local wood
working shop.

Jeff Hapke ('74 TR6)

<Prev in Thread]	Current Thread	[Next in Thread>
Tearing down the TR6, Tom Di Iulio Re: Tearing down the TR6, Glenn Franco Re: Tearing down the TR6, James H. Davis, Jr. Re: Tearing down the TR6, scott suhring Re: Tearing down the TR6, Bob Jones Re: Tearing down the TR6, ArthurK101 Re: Tearing down the TR6, CMaster808 Re: Tearing down the TR6, CMaster808 Re: Tearing down the TR6, Mike Mason Re: Tearing down the TR6, Andrew Mace Re: Tearing down the TR6, Jeff Hapke <= Re: Tearing down the TR6, CMaster808

Previous by Date:	Re: Pandora's Box/Part Out, Tom Tweed
Next by Date:	GT6 wiring harness, GuyotLeonF
Previous by Thread:	Re: Tearing down the TR6, Andrew Mace
Next by Thread:	Re: Tearing down the TR6, CMaster808
Indexes:	[Date] [Thread] [Top] [All Lists]