triumphs
[Top] [All Lists]

Re: Mityvac vs. Eezybleed

To: triumphs@Autox.Team.Net
Subject: Re: Mityvac vs. Eezybleed
From: Joe Worsley <worsley@ebicom.net>
Date: Wed, 28 May 1997 11:28:09 -0700
References: <190482B1063@novell2.bham.ac.uk> <338C6A37.4D3A@ebicom.net> <338C77B5.18AB@ebicom.net>
Jonathan Miles wrote:
> > >
> > > > Anyone have experience with either or both of these brake bleeding 
>systems?
> > > >
> > > > It appears that Mityvac is a vacuum system, while Eezybleed is a 
>pressurized
> > > > reservior system which may require individual adapters for my other
> > > > vehicle's master cylinder reserviors.
> > > >
> 
> >> >Why spend the relatively high amount of money for the easybleed to
> > equip all vehicles when you can purchase one item that is transportable.
> >  I bleed brakes on all my  vehicles annually and never have to rebuild
> > wheel cylinders or master cylinder due to rust damaged seals causing
> > leaks even after 10 years in most cases.
> >
> > Joe Worsley
> > 80 TR8
> > 72 TR6
> > Tupelo, MS
>  It just occured to me that I might have been commenting on the
 replacement bleed screws of the same approximate name that have check
 valves in them and not a pressurized bleeder system.
 
 I guess I put my foot in my mouth on that one!!!
 
 Joe Worsley

<Prev in Thread] Current Thread [Next in Thread>