I am forwarding this to the list in the hopes I will limit the number of
replies to this question. Thanks to John Lye who also responded.
Peter.
> -----Original Message-----
> From: Peter Zaborski
> Sent: Wednesday, July 30, 1997 2:28 PM
> To: '"Mr. Mike" Passaretti'
> Subject: RE: TR4 rear suspension knock
>
> Ahh, like the one which holds the tipping valve in on a TR6 brake
> master cylinder. Gotcha.
>
> Thanks "Mr Mike".
>
> Peter
>
> -----Original Message-----
> From: "Mr. Mike" Passaretti [SMTP:passaretti@sol.med.ge.com]
> Sent: Wednesday, July 30, 1997 2:16 PM
> To: Peter Zaborski
> Subject: RE: TR4 rear suspension knock
>
>
> >>>>> "Peter" == Peter Zaborski <peterz@merak.com> writes:
>
> Peter> Ok I'm curious... What are socket head bolts? Are
> Peter> they ones which have a square hole into which the
> Peter> ratchet fits? Or something else?
>
> They have a hex indent in them, for driving with a BIG allen
> wrench or an appropriate socket head driver (which is a hunk
> of a big allen wrench stuck into a socket). A lot of AN spec
> hardware is made this way, as it's less prone to operator
> damage.
> -MM
|