And all electrical components are made with a little bit of smoke in them.
If you let the smoke out, The part will NOT work again.
Chuck..
At 02:43 PM 8/3/97 -0400, you wrote:
> "\"Mr. Mike\" Passaretti" <passaretti@sol.med.ge.com> writes:
>
>(edited for brevity)
><<<<<<<<<<<<<<<<<<<<<<<<< Snip >>>>>>>>>>>>>>>>>>>>>>
>
>
>>>>>> "Barry" == Barry Schwartz <bschwartz@encad.com> writes:
>
> Barry> Sorry, with all the talk about vacuum and boosters
> Barry> I just have to clarify something. Vacuum, in this...
>
>Sure, now you're going to tell me it's the holes that do the
>work, not the electrons.
> -MM
>
>(Who still believes that torch batterys run out because
> they've absorbed too much dark)
> <<<<<<<<<<<<<<<<<<<<<<<<< End Snip >>>>>>>>>>>>>>>>>>>>>>
>
>Batteries do not work by absorbing darkness, Light bulbs do.
>After all a bulb stops working because it is full and you can tell
>because it is now dark inside ;-)
>
>Dave (don't ask me about centrifugal force) Massey
>
>
Chuck & Karen Simons
L.A. (Lower Arkansas)
72 Spitfire FK33548U
|