Normally nothing wears but the thrust washers. I would order standard
size and when installed there is more play than specified, order the
oversize appropriately...
Clark
------------------------------------------------------------------------
--
Visit me at: http://members.aol.com/cwnicholls
>----------
>From: ingate@shiseis.com[SMTP:ingate@shiseis.com]
>Sent: Wednesday, August 27, 1997 1:17 PM
>To: triumphs@autox.team.net
>Subject: RE: Thrust Washers (for a TR6)
>
>Clark Nicholls wrote:
> > Come on, people. Replacing the Thrust washers isn't that big a deal
>
>With all that has been written on replacing thrust washers, I feel
>confident enough to tackle this job this Autumn.
>
>My question is, what size washer do I order? I'll be replacing
>big-end as well, and will have to wait till I drop the pan and make
>some measurements to determine the size of big-end bearing I need.
>But what size thrust-washer do I need?
>
>Thanks in advance,
>
> Shane Ingate, neophyte-mechanic in San Diego
>
|