| To: | rick <rbacon@netcom.ca> |
|---|---|
| Subject: | Re: About the engine questions |
| From: | Brian Neuschwander <bwnbcg@sjm.infi.net> |
| Date: | Mon, 26 Jan 1998 20:10:57 -0800 |
| Cc: | triumphs@Autox.Team.Net |
| Organization: | New Millennium Management |
| References: | <l03020900b0f306aaf74c@[207.181.92.106]> |
Machine Shop Costs: This was for a Spit 1500 this summer. Crank ground, polished, nitrided: $275 Balance flywheel, crank, pistons, rods, clutch $100 Mill and Service Head and Valves: $120 Bore Cyls: $85 Surface (2 step) Flywheel: $40 280 degree Piper Cam was about $100 Piston and Ring set was $200 Gaskets: $70 Bearings: $60 Seals: $25 Bolt on Gofast: $2500 -- Brian W. Neuschwander |
| <Prev in Thread] | Current Thread | [Next in Thread> |
|---|---|---|
| ||
| Previous by Date: | Re: Fuel Pump Attachment, Brian Neuschwander |
|---|---|
| Next by Date: | Re: Spare Parts Catalogs, Malcolm Walker |
| Previous by Thread: | About the engine questions, rick |
| Next by Thread: | Fuel Pump Attachment, Bill Kelly |
| Indexes: | [Date] [Thread] [Top] [All Lists] |