When we refer to removing the fan, that is all that is removed. The water
pump pulley is still in place. You still have to drive the pulley for
coolant circulation. Removal is just the 4 retaining bolts in the fan.
take off fan, reinstall the four bolts. Install electric fan, per included
From: Romano Kroemer <firstname.lastname@example.org>
To: email@example.com <firstname.lastname@example.org>
Cc: email@example.com <firstname.lastname@example.org>
Date: Friday, March 27, 1998 4:02 AM
Subject: Electric fans, a practical question
>James et al,
>as it seems there is some power to be gained when one replaces the
> fan by an electrical one. Now the practical question:
> How do I disconnect the mechanical one and do I need a different
> fan belt which does not run over three pulleys (?) (crank, fan,
> anymore, but only over two (crank, alternator)?
>Dr. Romano T. Kroemer
>Phys. & Theoret. Chem. Lab.
>University of Oxford
>South Parks Rd. | Tel: ++44-1865-275475
>Oxford OX1 3QZ | Fax: ++44-1865-275410
>England, U.K. | Email: