Big c-clamp? Only a few bucks at the hardware store.
Jim Altman jaltman@altlaw.com Illigitimi non Carborundum
http://www.altlaw.com/metro/jaltman.html 69-TR6#CC28754L W4UCK
-----Original Message-----
From: owner-triumphs@autox.team.net
[mailto:owner-triumphs@autox.team.net]On Behalf Of Steve Rohal
Sent: Sunday, August 16, 1998 8:12 PM
To: triumphs@autox.team.net
Subject: TR6 u-joints
Listers;
Help!- need your advice. Have removed prop shaft, have in vice, can't get
u-joints to shake loose. Followed shop manual instructions, tapped on
yokes, used socket to press one bearing cup out partly, used WD40 to help
loosen. No go. My vice is not big enough to get bigger socket to press cup
out into on other side. What can I do?! You help is appreciated.
TIA
Steve Rohal
74' TR6 CF 23026 UO
|