> I need a part for my 67 TR-4A--a channel for the
> left-hand door window. This is the channel that
> holds the lower edge of the window, and is driven
> up and down by the window regulator mechanism. I think
> this part is interchangeable among all TR-4 and -4A models.
>
> Moss p/n 803-250
> (illustration 30, page 68 in Moss catalog TRI-07)
I replaced the channel section in my TR6 with a generic channel
section from Moss - 803-265, $7.95 each. The TR4 catalog
suggests this part as an alternate for 803-275, replacement
felt. Outside width is 1/2 inch, length is 18 inches. I drilled
out the rivets from the old brackets and attached them to the new
channel. Took about 60 minutes for both channels. Works great
if your brackets are ok - Stopped the glass rattle.
Brian Kemp
72 TR6
|