mine also has the holes on the top of the fender well inside the engine
compartment, but no sign of a commission label! we need a detective on this!
Tom
76 TR6
Denver, CO
Radley, Jack wrote:
> I have the same situation. In addition, the British Leyland badges on
> the fenders behind the front wheel openings are missing. It is my
> understanding that the factory ran out toward the end of the production
> run. Maybe this is the same situation. I have two holes in my left
> wheel arch, but no plate and no indication (like a shadow, or difference
> in paint condition) that anything was ever there. Did Triumphs just in
> time inventory burn them? My car is CF57991U, and was produced in 7/76
> so it was in the last batch produced.
>
> Anyone else have any info on this?
>
> Jack Radley
> 76TR6
>
> -----Original Message-----
> From: Hutmacher, Greg
> [mailto:ghutmacher@stanleyworks.com]
> Sent: Wednesday, February 03, 1999 6:37 PM
> To: 'Radley, Jack'
> Subject: RE: 76 TR6 - What is the label that goes
> on the left side wheel a rch opposite the distributor?
>
> Jack, Let me know if you find out. I have a 76 TR6 and
> the plate you refer
> to is missing. There are two rivet holes there
> suggesting a riveted metal
> plate.
>
> ----------
> From: Radley, Jack [SMTP:JackR@SHRIVERCO.COM]
> Sent: Wednesday, February 03, 1999 4:37 PM
> To: 'triumphs@autox.team.net'
> Subject: 76 TR6 - What is the label that goes
> on the left side
> wheel arch opposite the distributor?
>
> 76 TR6 - What is the label that goes on the left
> side wheel arch
> opposite the distributor?
>
> Is it the Black / Orange emission control label?
>
> What is the label made out of? Metal - riveted
> in place or is it a
> sticker?
>
> Jack Radley
> 76TR6
|