Chris Oliver wrote:
> Hi Brian, my spit 6 is built on a 70 GT6+ chassis with a square
> tailbody. As far as I can tell, it bolted right up. Mine has the GT6+
> bonnet. My body has holes for the rear frame extensions, but they are
> plugged with rubber plugs. I dont know if this makes a difference, but
> around 76 the spit changed brake master cyclenders, so you might have a
> clearence problem if you use an old style one, and also if you use the
> rotoflex rear end, you not only will have to reinforce the inboard
> holes, but also weld shock mounts to the inner fender. Good luck, Chris
If you want to run rotoflex rear without welding shock mounts to the
inner wheel arch there is an option.Moss europe as well as TSSC offers
sells frame extension brackets and special Spax shocks that mount
outboard of the original spitfire location.These bolt in place.
I would like to hear from anyone who has tried these,as I am thinking of
such a conversion.