triumphs
[Top] [All Lists]

RE: OD relay

To: "Michael D. Porter" <mdporter@rt66.com>, <DANMAS@aol.com>
Subject: RE: OD relay
From: "Jack Brooks" <brooks@belcotech.com>
Date: Thu, 4 Mar 1999 08:01:32 -0500charset="iso-8859-1"
Cc: <Triumphs@autox.team.net>
Importance: Normal


> DANMAS@aol.com wrote:
>
> > > Anybody know of a substitute for the A type OD relay, sold by
> the big three.
> > >  I am installing the OD for the first time and have no relay
> to bring to the
> > >  auto parts store to match.  I just have a little trouble
> plunking down over
> > >  $20 for a simple automotive relay.
> >
> > Jack,
> >
> > I don't know of an EXACT match for the relay, except to use
> another expensive
> > lucas relay, but you can use one of the aftermarket relays sold
> in the auto
> > parts stores for around $5 or so. These are rated at 30 - 40
> amps, and should
> > have as long a life as the Lucas relays.
> >
> > If interested, use the equivalencies below to connect up the new relay:
> >
> > W1 = 85
> > W2 = 86
> > C1 = 30
> > C2 = 87
> >
> > Lucas numbers on the left, auto store numbers on the right.
>
> Dan describes the standard Bosch numbering, which is also used by
> Potter-Brumfield. The Bosch is supposed to be rated in the region of
> 100,000 cycles normal lifetime. The P-B is supposed to be similarly
> rated, but seems to last not as long in actual use. Note that for
> simplicity's sake, you should look around for a simple kit with relay
> base, terminals and pigtails (such as are commonly available for
> aftermarket fog lamps or horns), because finding the relay connector,
> terminal lock and the right terminals can be a problem if you don't know
> where to look.
>
> Cheers.
>

Michael,

Bying a package is a good thought, hovever, lister Brian Schlorff had a good
used one he was able to make available to me so I ended up with the correct
Lucas one after all.

I had located, via Dan Masters, V8 site (thanks Dan), Painless wiring who
sells harness kits.  They have just what you refer to.

Thanks,

Jack Brooks


<Prev in Thread] Current Thread [Next in Thread>