| 
Sam,
Anti Run-on Valve!
Joe
Sam Gentry wrote:
> 
> I am working on a 1973 GT6 wiring harness (out of the car).  I have it all
> repaired and all the connections figured out except for one thing.  There
> are two wires that go down the branch that goes to the alternator and then
> to the water temperature sensor and on into female connectors.  The PO
> disconnected things under the bonnet and marked most of them.  These two
> wires were marked "not connected".  They are White/purple and brown/red (I
> think, it is hard to be sure).  Anyone know what these wires are and why
> they were not connected to anything?
> 
> Thanks, Sam
-- 
"If you can't excel with talent, triumph with effort."
 -- Dave Weinbaum in National Enquirer
 |