Mike :
IMO, no, it's not a good idea. Unless you are going racing, or have a
problem like the rear cam bearing installed wrong or chronic low oil
pressure, the factory setup provides adequate lubrication. Adding the
external oil line will give you problems with oil getting past the intake
valve stems.
Randall
On Monday, March 22, 1999 4:12 PM, Alvamike@aol.com [SMTP:Alvamike@aol.com]
wrote:
>
> I am just about ready to start my 67 TR4A after a frame off restoration.
I
> believe there are external oil lines available to give better oiling to
the
> rocker area. Is this a good idea? Any experience in installation and
> improved wear or oil consumption.
> Mike in Morgantown
|