This subject has been touched on before and the voltage regulator has been
blamed.
-----Original Message-----
From: McGaheyRx@aol.com <McGaheyRx@aol.com>
To: cameron@enterprise.net <cameron@enterprise.net>; triumphs@autox.team.net
<triumphs@autox.team.net>
Date: Tuesday, March 30, 1999 11:57 AM
Subject: Re: TR6 Fuel Gauge Calibration?
>
>In a message dated 99-03-30 09:55:40 EST, cameron@enterprise.net writes:
>
><< My TR6 fuel gauge reads 1/2 to 3/4 when full and somewhere around the
> floor when empty.The other day when the gauge read zero I filled it
> up,only took 1/2 a tank.Before I take the sender out to clean,any other
> ideas. >>
>You may find the float has a crack in it and has started to fill up with
gas
>(petrol)
>and therefore doesn't float all the way up to register full when the tank
is
>full
>Most other problems would probably result in complete failure of the gauge
>Cheers
>Jack Mc
|