In a message dated 99-04-23 20:51:45 EDT, you write:
<< It is behind the dash. At the first branch going right to left.... this
goes to the gauge cluster and the plinth..... The wire is a black ground
wire that is a continuous loop with 2 circle connectors on it. It is in the
lower bundle for the plinth. But there is no obvious place to connect it.
Back in November I thought it was so obvious I didn't tag it like
everything else... now I can't remember.
Anybody know the place to hook up these two connectors..... or if your are
still nimble can you peek under the dash and follow the black loop.
62 TR4 CT16260L - Groton, MA >>
I recently replaced the wire harness in my TR4 and the wire you refer to
seems to be a ground wire for the gauges. If the gauge bodies aren't grounded
the lights inside won't work. The hoops go on the threaded studs on the back
of the gauges under the little knurled nuts. If you don't have a wood dash
you may not need these...