Re: TDC on TR3

["Tom Parker" <parkert@ihug.co.nz>]

Dave Massey <105671.471@compuserve.com> wrote:

>Take a coat hanger and bend it so that it fits through the spark
>plug hole and watch as it moves up until it stops moving and then
>starts back down.  Center the crank between the two points
>where the hange starts to move and you have TDC.

Better to use a piece of soft wire like copper or brass, just in case you get
it caught in anything.

--
Tom Parker - parkert@ihug.co.nz
           - http://www.geocities.com/MotorCity/Track/8381/