triumphs
[Top] [All Lists]

RE: Ten Inch Brake Drums

To: "'wghook@earthlink.net'" <wghook@earthlink.net>
Subject: RE: Ten Inch Brake Drums
From: "Westerdale, Bob" <bwesterdale@edax.com>
Date: Thu, 18 Nov 1999 11:29:43 -0500charset="windows-1252"
Cc: "'triumphs@autox.team.net'" <triumphs@autox.team.net>
Hi Bill-
        I pulled off my TR3A's 10" Drum and Brakeshoe set and visited my
parts guy, looking for the Datsun sustitution mentioned below.  I was told
the '77 710 used 9" brakes, as did almost all the other similar models.....
Any ideas about the confusion here?
Thanks!
Bob Westerdale '59 TR3A TS36967E          

-----Original Message-----
From: William Hook [mailto:wghook@earthlink.net]
Sent: Monday, November 15, 1999 8:40 AM
To: Westerdale, Bob
Subject: Re: Ten Inch Brake Drums


Bob,
As I noted I had already bought official stuff from Moss so I didn't
actually
put them on and test them but the Datsun Shoes, drum and cylinder were
identical in appearance.  I would want to check the threads on the line
connections.  Good luck and I hope it saves some time and $$.  Tell me how
it
works out.... I'd reallly like to know for sure that they test out well.
Bill Hook

Westerdale, Bob wrote:
> 
> Bill-
>         Am I correct in reading your message-  10" Datsun 710 shoes will
> work in a 10" Triumph rear brake setup?  Drums, too?  If so, this is
> terrific news, as I was just about to call the Rudester Factory for some
of
> their $75.00 +++++ shoesets.  Datsun's will hopefully be less, and no
> shipping charges!
> Bob Westerdale
> 
> -----Original Message-----
> From: William Hook [mailto:wghook@earthlink.net]
> Sent: Monday, November 15, 1999 5:06 AM
> To: triumphs@autox.team.net
> Subject: Ten Inch Brake Drums
> 
> Roger,
> I was quite suprised to find that the 10" rear Girling drums on my '57 TR3
> are
> the same (stud spacing, size, shoes and cylinders)  as  those on my
> daughters
> '77 Datsun 710 and I suspect on many other Datsuns as well.   I  know that
> this is heresey, but after all, Girling *did supply others* than just
> Triumph.
>  You may find a wider range of suppliers and lower prices if you expand
the
> market...they were available at my local auto store....
> Of course I discovered this after I had bought the parts from the usual TR
> sources. ;-))
> My $.02 FWIW,  Good luck
> Bill Hook, Rookie w/ 57 TR3
> 
> >
> > Date: Fri, 12 Nov 1999 21:33:15 -0500
> > From: "Roger Colson" <sassamon@mediaone.net>
> > Subject: Ten Inch brake drums.
> 
> > Hello all,
> >
> >    I checked and my TR3 has 10 inch rear drums.  Looking over the
> > catalogs I find that parts for the 10 inch drums are very scant...SNIP..
> >    Are there any sources for 10 inch drums besides scrap
yards?....SNIP..
> 
> >
> > Thank you,
> >
> > Roger Colson
> > 57 TR3  TS21383L
> > sassamon@mediaone.net
> >

<Prev in Thread] Current Thread [Next in Thread>