Re: circlip removal from TR6 countershaft

["Graham Stretch" <technical-iwnet@lineone.net>]

Hi lee
I remove mine using a screwdriver and safety goggles as once you get the end
moving they tend to come with a rush.

Graham


----- Original Message -----
From: Janssen, Lee K <lee.k.janssen@lmco.com>
To: 'triumphs' <triumphs@autox.team.net>
Sent: Monday, January 17, 2000 5:02 PM
Subject: circlip removal from TR6 countershaft


>
> I'm trying to pull the bearings from the tranny countershaft but can't get
> the circlips out. The ends are cut at a slight angle and there is no way
to
> get any leverage on them with my circlip pliers! Any suggestions from
> someone who has been there and done that??
> Thanks in advance
>
> Lee Janssen
> Sunny Denver CO
>