At 08:33 PM 2/23/00 -0500, Tony Gordon wrote:
>
>If you get the unit, you will need to get it preped for u/l fuel - don't
>believe the guff about lead being needed as a lubricant for the shuttle; it
>isn't, but the u/l will quickly take the butyl seals out.
This has not been my experience. I wouldn't bother changing the seals until
they go- my original seals have roughly 60000 unleader miles on them.
-Erik
--
Erik Quackenbush, V.P. Operations, Midwest Filter Corporation
1-847-680-0566 fax: 1-847-680-0832 http://www.midwestfilter.com
|