Pat,
There is a piece of laminated wood (3/8" plywood will do) that goes between
the aluminum and vinyl. You cannot just cut the cover to fit the aluminum
back plate. You need to shape the plywood so that it fits properly and
doesn't interfere with the bottom hinge when opening. Your best bet would be
to find someone that is local and is willing to lend you their glove box door
so that you can shape it properly. The vinyl covers the front of the plywood
and is wrapped around the edge with about 5/8"-3/4" vinyl covering the back
of the plywood which is then stapled. The vinyl covered plywood is then
attched to the aluminum backing plate with screws.
Gary Bouffard
59 TR3A TS 58399
|