Hello,
First off, THANKS to those who responded!
I was looking to find a 1/4 inch diameter round head rivet about 2 inches long
to
replace a door hinge pin on a 1953 Triumph Renown. I received many responses
as to
what might work instead. However the rivet would be an exact match. It looks
like
I will have to buy a box just to get the one piece I need.
Greg Gelhar
1980 TR8 dhc
"FUN 2BN"
Osseo, MN
>
>
> I am helping a friend who is restoring his 1953 Triumph Renown. I have
> disassembled the door hinges prior to replating. One of the hinge pins was
> broken making it hard to remove. Since repair parts are hard to come by, a
> suitable pin can be made from what I hope is a standard size rivet. Does
>anyone
> out their use or have available a 1/4 inch diameter round head rivet that is 1
> 3/4 inches long or longer? We would only require one.
>
> Greg Gelhar
> 1980 TR8 dhc
> "FUN 2BN"
> Osseo, MN
|