The rear half of the circuit is broken and not enough current is being drawn to
actuate the flasher. Look for a corroded connector
(most likely) or a corroded ground connection.
Joe
Charlie Frazer wrote:
>
> Can some one help me with TR6 rear turn signals?
> When I flip the turn indicator, the front lamp comes on and stays on.
> Nothing happens in the rear.
> If I put the turn signal on and wiggle/twist/pull the socket in the rear
> lamp, in some positions it will flash.
> The bulb is OK, and I've carefully cleaned each leg of the socket to insure
> good contact.
> But it still will not work reliably.
> Thanks for your suggestions.
> Charlie Frazer
> Cfrazer@oregon.uoregon.edu
|