David Massey wrote:
>
> if you go to the autoparts store
> all you will find studs that are 3/8-16 on one end and 3/8-24 on the other.
Might be less common in the rust belt, but around here, exhaust studs
that are 3/8-16 on both ends are quite common. Used on many GM V-8's
from the 50's into the 80's. If you look in the "Help!" section, there
is usually a package of 3 studs and 3 brass nuts for just a few $$.
Randall
/// triumphs@autox.team.net mailing list
/// To unsubscribe send a plain text message to majordomo@autox.team.net
/// with nothing in it but
///
/// unsubscribe triumphs
///
/// or try http://www.team.net/cgi-bin/majorcool
|