-----Original Message-----
From: owner-triumphs@autox.team.net
[mailto:owner-triumphs@autox.team.net]On Behalf Of Hugh Fader
Sent: Friday, November 30, 2001 7:18 PM
To: Triumph Mailing List (E-mail)
Subject: TR6 Door Adjustment
I had my car redone aswell and I have the same problem. Consider it as a
cheap alternative to AC.
What you can do is move the door over 1/8" so you will have an even gap.
Good luck,
Patrick
My TR6's doors do not close flush with the body. The front of the door near
the hinges looks OK. The rear sticks out about 1/4". I have tried moving the
striker inward but this seems to make matters worse. It looks like this is
the only adjustment to make. Can anybody help or point me to a reference?
Thanks,
Hugh Fader
72 TR6
/// triumphs@autox.team.net mailing list
/// To unsubscribe send a plain text message to majordomo@autox.team.net
/// with nothing in it but
///
/// unsubscribe triumphs
///
/// or try http://www.team.net/cgi-bin/majorcool
|