I am getting prepared to get my body mounted back on the frame (TR-6), and
have found that my documentation on certain things is not very good.
There are four body mounting holes on the cruciform on the frame (the part
of the frame in front of the rear suspension crossmember - it has a top and
botton plate and the exhaust gets routed through it). The manual shows that
the front two holes have pads between the frame and body with bolts running
through them to lock them together as you would expect. The rear two holes
only show the pads with no hardware going through them. This can't be right,
and something must be mounted through those two holes. Can anyone shed any
light on this?
Thanks!
/// triumphs@autox.team.net mailing list
/// To unsubscribe send a plain text message to majordomo@autox.team.net
/// with nothing in it but
///
/// unsubscribe triumphs
///
/// or try http://www.team.net/cgi-bin/majorcool
|