David, I don't have a drawing, but if memory serves, the motor gets bolted
to the bottom of the top plate with 3 hex-head bolts and rubber bushings in
the motor end bracket. ISTR there were nyloc nuts on those bolts, but I
could be wrong.
Then there are 3 standoffs with threads on both ends that attach the top
plate to the 3-armed bracket. Hex nuts and lockwashers, both ends.
The top plate of course gets held to the lower housing by 3 spring clips,
with the core sandwiched in between.
> Does someone have a diagram on how the heater gets assembled. Namely, the
> motor mounting.
/// firstname.lastname@example.org mailing list
/// To unsubscribe send a plain text message to email@example.com
/// with nothing in it but
/// unsubscribe triumphs
/// or try http://www.team.net/cgi-bin/majorcool