That connection gets too hot for Loctite. Use anti-seize on both sides, and
fresh lock washers under the nuts to keep everything tight until you want it
I haven't had any trouble with the studs wanting to come out of the manifold
when I undo the nuts, but if you do, peen the ends of the studs lightly.
> Hi List!
> I'd like to carry Jim W.'s question a step futhure. If one was to
> use Anti-seize grease on the studs, then the nuts would beable to come
> off much easier & the stud out of the Exhaust Manifold. Now would it be
> better to put locktite on one side [the one in the Exhaust Manifold
> while putting anti-seize grease on the other side [side that has the
> nut], OR would it be better to put anti-seize grease on Both side?
/// email@example.com mailing list
/// To unsubscribe send a plain text message to firstname.lastname@example.org
/// with nothing in it but
/// unsubscribe triumphs
/// or try http://www.team.net/cgi-bin/majorcool