Your right again; I used a star washer between ground cable and the body .
I started the car, turned on the lights and the voltage didn't drop a bit.
Plus the dash lights are brighter and the blinkers are twice as fast.
thanks to all
----- Original Message -----
From: "Randall Young" <ryoung@NAVCOMTECH.COM>
To: "Alan" <email@example.com>
Sent: Friday, May 03, 2002 7:29 PM
Subject: RE: Head Light grounding - tr6
> Alan :
> My preference is to scrape a bare area around the hole and butter it with
> silicone, but if you don't want to scrape off your nice new paint, another
> alternative is to get an "external star lockwasher" and use it between the
> cable lug and the body. The teeth of the star should be able to cut
> the paint and make a good connection.
/// firstname.lastname@example.org mailing list
/// To unsubscribe send a plain text message to email@example.com
/// with nothing in it but
/// unsubscribe triumphs
/// or try http://www.team.net/cgi-bin/majorcool