The size you need is a 5/16 UNF jam nut. In the absence of the jam nut a
conventional one will work but is more noticeable. If you only care about
function then any hardware store will have what you need for about a nickel.
At 03:18 PM 6/11/2002 -0400, ZoboHerald@aol.com wrote:
>In a message dated Tue, 11 Jun 2002 2:23:37 PM Eastern Daylight Time,
>Alan Hodge <avhbah@yahoo.com> writes:
>
> >Hi List
> >
> >I have a nice walnut shift knob with the Triumph logo
> >on it. It looks to me like I need a hex nut on the
> >shift lever so I can get the logo positioned properly.
> >
> >Is this the right way to do it?
> >What size nut do I need?
>
>Not sure what size, Alan. I think it's a conventional SAE fine thread --
>please don't quote me on that, though. Specifically, what you need is
>called a "jam nut"; it's roughly half the height of a normal nut and is
>intended just for such applications.
>
>--Andy Mace
/// triumphs@autox.team.net mailing list
/// To unsubscribe send a plain text message to majordomo@autox.team.net
/// with nothing in it but
///
/// unsubscribe triumphs
///
/// or try http://www.team.net/cgi-bin/majorcool
|