If you're replacing the whole choke cable assembly then try this. Once you
have the cables loose from the carbs tape a piece of nylon cord about 4 ft.
long to the longest cable. Then once you pull the whole assembly through
the firewall you have the nylon cord to tape the new choke cables to and to
use as a guide/come along to get it over the heater core hoses and back
through the firewall. May sure you tape the cables together at the
appropriate places so that they can't hang-up on something.
71TR6 CC57365 (Good 6)
66TR4A CTC57806 (The Wreck-Almost Parts)
66TR4A CTC57529 (The Project)
----- Original Message -----
From: "Jack Radley" <email@example.com>
Sent: Monday, July 01, 2002 5:51 AM
Subject: Choke Cable
> Any tricks to installing a new choke cable?
> Handle side of existing cable broke off.
> Jack Radley
/// firstname.lastname@example.org mailing list
/// To unsubscribe send a plain text message to email@example.com
/// with nothing in it but
/// unsubscribe triumphs
/// or try http://www.team.net/cgi-bin/majorcool