> In reassembly, however I would but the front Circlip #12 back on and
> reinstall the pulley, so that you are pressing the impeller back on
against
> the pulley rather that against the bearing and circlip.
=======================================================================
Then you are still pushing against the "C" clip as it will always be about
3/4" below the pulley level, The "C" clip is the only way to get the shaft
in it's proper location so as to receive the impellar, the pulley only holds
the fan belt in place and nothing else. "FT"
/// triumphs@autox.team.net mailing list
/// or try http://www.team.net/cgi-bin/majorcool
/// Archives at http://www.team.net/archive
|