I actually did a little of both. I used electrical tape to get everything
in position and then used adhesive in the locations that I could lift up the
cover without disturbing the position. Has held fine for over 6 years.
Scott Suhring
Elizabethtown, PA
'70 TR6
'59 TR3
-----Original Message-----
From: owner-triumphs@autox.team.net
[mailto:owner-triumphs@autox.team.net]On Behalf Of Hugh Fader
Sent: Saturday, March 01, 2003 1:16 PM
To: '6pack'; 'triumphs'
Subject: Dash Support Cover
Hi folks. I am installing a new dash support cover on my TR6. The
instructions that came with it give the option of fastening it with either
rubber contact cement or with tape. They say you can have problems
"indexing" the cover if you use the contact cement. I assume this means
positioning it. They suggest either vinyl tape or masking (?)tape.
Oh great and powerful list what do you suggest?
Thanks,
Hugh Fader
/// triumphs@autox.team.net mailing list
/// or try http://www.team.net/cgi-bin/majorcool
/// Archives at http://www.team.net/archive
|