> In my efforts to freshen up the motor on my new sports six, I removed
> all external components. I taped some plastic around the head covering
> the Valve assembly. I then began to sand blast the block preparing it
> for paint. After painting the block I removed the taped plastic. I had
> not considered that some of the sand had adhered to the tape and a few
> grains fell on/into the head. I vacuumed up the few grains but I can not
> be certain that any fell into the push-rod tubes.
>
> Any suggestion, I would like to keep from removing the head if at all
> possible. But if I must I must..
>
> ronnie babbitt
Ronnie
How many of these 1600 lumps should I put your name on? I told you that you
needed an extra, maybe more.
Sounds like a good time to find that 2 litre after numerous oil and filter
changes of course.
Tom Beaver
.
/// triumphs@autox.team.net mailing list
/// or try http://www.team.net/cgi-bin/majorcool
/// Archives at http://www.team.net/archive
|