In a message dated 8/14/2003 6:03:45 PM Eastern Standard Time,
Mickylong@aol.com writes:
> I also want to reset the temp. compensators to try that out.
>
Micky,
Try this for the temp compensators.....remove the plastic cover and turn the
small hex nut in as far as it will go....this will press the bimetal strip
against the small plunger and keep it closed so the mixture doesn't lean out at
idle or, worse yet, cause the idle to fluctuate as the bimetal strip heats
erratically.
Chip Krout
Skippack, PA USA
1976 TR6 #CF57822U - "CHP 75R" (Coventry {CHP} Build Date July 5 {75}, 1976
{R}) - one of the last 500 built!
/// triumphs@autox.team.net mailing list
/// or try http://www.team.net/cgi-bin/majorcool
/// Archives at http://www.team.net/archive
|