Re: Gearbox Tunnel Cover Seal

[Bill & Skip Pugh <anabil@caltel.com>]

I  sealed mine  with  Aluminun Metal Tape...two layers...seems to 
work just  fine...

>What are some effective ways to seal around the mating surfaces of the
>gearbox tunnel, short of pumping in silicone sealant? I have a metal 
>gearbox tunnel
>that was only held in place by three bolts. I've now got all the captive nuts
>cleaned out and should be able to get bolts in almost all the holes, but I can
>see that it's not water or oil tight...yet.
>
>Thanks for the tips.
>
>Bill Stagg
>1960 TR3A
\
-- 
Bill  Pugh
1957 TR3
aka
Casper
Wallace, CA