triumphs
[Top] [All Lists]

Re: tr3 breather pipe

To: <L1J1S@aol.com>, <triumphs@Autox.Team.Net>
Subject: Re: tr3 breather pipe
Date: Fri, 26 Nov 2004 20:43:23 -0500
References: <a9.677570a7.2ed8f734@aol.com>
----- Original Message ----- 
From <L1J1S at aol.com>
To: <triumphs@Autox.Team.Net>
Sent: Friday, November 26, 2004 4:16 PM
Subject: tr3 breather pipe


> to the lists, i noticed the breather pipe on my tr3 blows out the residual
> from the motor

Larry:

The breather pipe has a 45 degree angle cut to the rear and the air passing
around that draft tube causes a low pressure area at the rear of the tube
pulling the air out of the engine.  Running a pipe or tube to the rear would
defeat that design.  What you have are worn rings.  A dry / wet compression
test will confirm.

Lou Metelko
Auburn, Indiana




<Prev in Thread] Current Thread [Next in Thread>