RE: Manifold gaskets

["Randall" <tr3driver@comcast.net>]

> Any treatment required for the intake/exhaust gaskets when
> applying to the
> head on a TR2-4 motor?

IMO, no.  Make sure the surfaces are clean and flat, the alignment pins are
in place and the studs are coated with anti-seize.  Be sure to replace all
the lockwashers.  Although the book doesn't show it, I like to add a heavy
flat washer under the lockwasher for the fore and aft studs.  It seems to
help prevent exhaust leaks.

Randall Y