triumphs
[Top] [All Lists]

Re: GT6: Flywheel Removal

To: "M. Secrest" <vze34wdb@verizon.net>
Subject: Re: GT6: Flywheel Removal
From: Barry Schwartz <v6spitfireguy@cox.net>
Date: Mon, 31 Jan 2005 16:14:44 -0800
you can always drop a good length of rope down one of the cylinders though
the spark plug hole.  About two to three feet of 3/8th should do it.  The
idea here is to eliminate the space between the piston and cylinder head.
This will prevent the crank from turning and provides a cushion as well.
Crank until you feel resistance, then you should be able to remove the
bolts - 
*******************************original message********************
>Anyone got a suggestion for removing a GT6-3 flywheel from the engine
>*without* dropping the oil pan and sticking a block of wood against the
>crank?

Barry Schwartz (San Diego)


-- 
No virus found in this outgoing message.
Checked by AVG Anti-Virus.
Version: 7.0.296 / Virus Database: 265.8.2 - Release Date: 1/28/2005




<Prev in Thread] Current Thread [Next in Thread>