RE: TR4 gearbox: clutch cross shaft bushings

["Randall" <tr3driver@comcast.net>]

> The originals measured 3/8" across, while the Moss
> replacements are 3/4"!  Yea Moss!  These bushings will last forever.  And
> their clutch cross shaft is drilled and tapped for grease fittings, so
> that's one less thing I'll have to worry about.

The parts you took out were later spec parts, while the Moss replacements were
earlier spec.  ISTR the changeover was during the TR4 run, but I could be wrong
about that.

Randall