> I'm rebuilding my MC as part of converting to silicone fluid. The MC's
> actually only a couple of years old, but I detected some signs of seepage at
> the piston end so installing new seals etc. Is the red rubber grease that
> comes with the kit compatible with Dot 5 fluid, or should I just be using Dot5
> as assembly lubricant?
Most likely it is compatible, since DOT 5 is compatible with most things.
Still, I think the DOT 5 is better. I've seen the "red grease" turn to hard
chunks.
Randall
=== This list supported in part by The Vintage Triumph Register
=== http://www.vtr.org
|