I have a question regarding generating fiducials..
My fiducial is a 0.040 pad with a 0.080 soldermask pad. The question I have
is that when I generate the paste mask layer, I end up with a pad over the
0.040 pad! Everything else is OK. Somehow, I need to turn off the pad
generated over the 0.040 pad in the paste mask on the fidicuals only.
Thanks,
Dave Connitt
DC Engineering, Inc.
1071 Bandanna Drive
Cincinnati, OH 45238-4225
Ph (513) 922-3551
Incoming Fax (484)-924-3551
email: dave@dceng.com <mailto:dave@dceng.com>
www http://www.dceng.com
=== This list supported in part by The Vintage Triumph Register
=== http://www.vtr.org
|