Joe Merone wrote:
>Thanks Aaron and everyone else who responded so
>quickly. Nelson's article is the best! It's actually
>a 7/16 allen wrench. Couldn't find one for the life
>of me...
>
FWIW -- if a fitting isn't really tight you can often fashion a make-do
allen wrench from a bolt with the appropriate head... e.g. you might
have taken a bolt with a 7/16" head (probably a quarter inch bolt),
threaded on a couple of nuts (jammed together) and used the head of the
bolt in the allen screw and turned it with a 7/16" wrench.
Geo
--
No virus found in this outgoing message.
Checked by AVG Free Edition.
Version: 7.1.409 / Virus Database: 268.13.32/523 - Release Date: 11/7/2006
=== This list supported in part by The Vintage Triumph Register
=== http://www.vtr.org
|