As to the length of the studs. If you change the studs to steel wheel
length and wish to alternate between wires and steel, you MUST use the spacers
with the wire wheels. If I were you I would get an accurate measure of the
length of the wire wheel studs while they are in place, and then compare to
steel wheel studs with the spacers in place. This is not to be taken lightly.
If your studs bump up against the back of the wires this is dangerous. Do
not use the spacers with the steel wheels. If you have any questions about
this, seek help.
69 TR6 CC26160L
60 TR3A TS74461LO
=== This list supported in part by The Vintage Triumph Register