John Herrera wrote:
> I was told in 1977 to always use silver anti-sieze because, if it
> comes through the holes for the spokes, it won't show.
> I still have the can I bought on 1977, but it's almost empty.
That is until you drive the first time and dirt sticks to the grease
that squirted through your inner spoke nuts :-P
Seems to me I always used molybdenum wheel bearing grease, extremely
sparingly in a very thin coat, and yes, using a stiff short bristle brush.
Glenn A. Merrell
Chairman, Triumph Stag Club USA (2007-2009)
The best trophies are miles on the odometer, stone chips in the paint, dead
bugs on the windshield!
=== This list supported in part by The Vintage Triumph Register